Cat Backhoe Loaders:

415F2 Backhoe Loader

Net Power – SAE J1349
68 hp
Dig Depth – Standard
14.3 ft
Operating Weight – Maximum
24251 lb
Engine Model
Cat® C3.4B

Experience the new Cat 415F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.



Benefits & Features

Product Specs

  • Engine

  • Net Power – SAE J1349
    68hp
    Engine Model
    Cat® C3.4B
    Gross Power – SAE J1995
    74hp
    Gross Power – ISO 14396
    74hp
    Rated Net Power @ 2,200 rpm – SAE J1349
    68hp
    Rated Net Power @ 2,200 rpm – ISO 9249
    68hp
    Rated Net Power @ 2,200 rpm – EEC 80/1269
    69hp
    Net Peak Power @ 1,800 rpm – SAE J1349
    72hp
    Net Peak Power @ 1,800 rpm – ISO 9249
    73hp
    Net Peak Power @ 1,800 rpm – EEC 80/1269
    73hp
    Bore
    3.90in
    Stroke
    4.33in
    Displacement
    207in3
    Net Torque Rise @ 1,400 rpm – SAE J1349
    88%
    Rated Net Power – SAE J1349
    68hp
    Rated Net Power – ISO 9249
    68hp
    Net Peak Torque @ 1,400 rpm
    307lbf-ft
    Note
    Engine meets U.S. EPA Tier 4 Final emission standards.
  • Backhoe

  • Dig Depth – Standard
    14.3ft
    Dig Depth – E-Stick Extended
    17.9ft
  • Weights

  • Operating Weight – Maximum
    24251lb
    Operating Weight – Minimum
    15207lb
    Counterweights (Option 2)
    530lb
    Counterweights (Option 3)
    1015lb
    Operating Weight – Maximum (ROPS Capacity)
    24251lb
    Cab, ROPS/FOPS
    359lb
    Air Conditioning
    101lb
    Four Wheel Drive
    392lb
    MP Bucket (0.96 m3/1.25 yd3) (no forks or teeth)
    1642lb
    Extendible Stick
    659lb
    Counterweights (Option 1)
    255lb
  • Transmission

  • Power Shuttle Transmission – Standard: Forward – 1st
    3.4mph
    Power Shuttle Transmission – Standard: Forward – 2nd
    5.5mph
    Power Shuttle Transmission – Standard: Forward – 3rd
    12mph
    Power Shuttle Transmission – Standard: Forward – 4th
    23mph
    Power Shuttle Transmission – Standard: Reverse – 1st
    3.4mph
    Power Shuttle Transmission – Standard: Reverse – 2nd
    5.5mph
    Power Shuttle Transmission – Standard: Reverse – 3rd
    12mph
    Power Shuttle Transmission – Standard: Reverse – 4th
    23mph
  • Axle Ratings

  • Front Axle, 2WD – Static
    50582lb
    Front Axle, 2WD – Dynamic
    20233lb
    Front Axle, 4WD – Static
    50582lb
    Front Axle, 4WD – Dynamic
    20233lb
    Rear Axle – Static
    50582lb
    Rear Axle – Dynamic
    20233lb
  • Hydraulic System

  • Type
    Closed Center
    Pump Type
    Variable Flow, Axial Piston
    Pump Capacity @ 2,200 rpm
    35gal/min
    System Pressure – Backhoe
    3336psi
    System Pressure – Loader
    3336psi
  • Service Refill Capacities

  • Cooling System with Air Conditioning
    5.8gal
    Fuel Tank
    42gal
    Diesel Exhaust Fluid (DEF)
    5gal
    Engine Oil with Filter
    2.3gal
    Transmission – Power Shuttle: 2WD
    4gal
    Transmission – Power Shuttle: 4WD
    4gal
    Rear Axle
    4.4gal
    Rear Axle – Planetaries
    0.4gal
    Front Axle (4WD)
    2.9gal
    Front Axle (4WD) – Planetaries
    0.2gal
    Hydraulic System
    23.8gal
    Hydraulic Tank
    10.6gal
    Note
    Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
  • Steering

  • Type
    Front Wheel
    Power Steering
    Hydrostatic
    Bore
    2.6in
    Stroke
    4.7in
    Rod Diameter
    1.4in
    Axle Oscillation
    11°
    Turning Circle – 2WD/4WD (inner wheel not braked): Outside, Front Wheels
    26.8ft
    Turning Circle – 2WD/4WD (inner wheel not braked): Outside, Widest Loading Bucket
    36.0ft
  • Standards

  • Brakes
    SAE J/ISO 3450; ISO 3450 1996
    Cab – ROPS
    SAE J1040 MAY94; ISO 3741 1994
    Cab – FOPS
    SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
    Cab – Sound
    ANSI/SAE J1166 OCT98 is 79 dB(A)
    Exterior Sound
    SAE J188 JUN86 is 76 dB(A)
  • Engine Features

  • Feature
    Regeneration is passive and does not require any input from the operator or disrupt work.
    Feature
    Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
    Feature
    Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
    Feature
    Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
    Feature
    For durability, inlet valves are nitrided, martensitic chrome silicon steel.
    Feature
    For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
    Feature
    Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
    Feature
    Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
    Feature
    Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
    Feature
    Direct injection fuel system provides accurate fuel delivery and efficiency.
    Feature
    Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
    Feature
    Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
    Feature
    Standard glow plug starting aid system for efficient cold weather starting.
    Feature
    High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
    Feature
    Higher low end torque for better engine/machine performance.
    Feature
    Engine is equipped with electric fuel priming pump.
  • Brakes

  • Feature
    Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
    Feature
    Self-adjusting, completely enclosed and sealed.
    Feature
    Foot operated brake pedals can be interlocked for roading.
    Feature
    Parking/secondary brakes are independent of the service brake system.
    Feature
    Parking brake is mechanically applied through an adjustable hand lever located on the right console.
  • Tires

  • Choice 1
    Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
    Choice 2
    Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
    Choice 3
    Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
    Choice 4
    Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
    Choice 5
    Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
    Choice 6
    Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
    Choice 7
    Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8

Equipment

  • Air cleaner
  • Alarm, back-up
  • Alternator, 150 amp
  • Audible system fault alarm
  • Backhoe controls, mechanical two lever
  • Battery, maintenance-free, 880 CCA
  • Battery disconnect switch
  • Battery remote jumpstart
  • Boom transport lock
  • Brace, lift cylinder
  • Brake, secondary parking
  • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
  • Bucket level indicator
  • Canopy, ROPS/FOPS
  • Coat restraint
  • Coolant/antifreeze, extended life
  • Counterweight, bumper
  • Dome light (cab only)
  • Diagnostic port for engine
  • Differential lock, loader joystick
  • Drink holders, two
  • Engine, Cat C3.4B, meets U.S. EPA Tier 4 Final emission standards, diesel particulate filter
  • Engine enclosure, sound suppression removal panels
  • Face seals, O-ring
  • Fan, suction and guard
  • Fast reversing shuttle, all gears
  • Fenders, rear
  • Filters, spin-on: fuel, engine oil, transmission oil, water separator
  • Filters, bowl and cartridge: hydraulic fluid
  • Flashing hazards/signal lights
  • Floor mat
  • Fuel tank, fully enclosed
  • Fully hinged front grill for cooling package cleaning access
  • Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
  • Ground level fuel fill
  • High ambient cooling package
  • Hood lock, inside cab
  • Hydraulic hose, XT
  • Hydraulic oil cooler
  • Hydraulic oil level sight gauge
  • Hydraulic valve, hydrostatic steering
  • Hydraulic valves, loader 2 function
  • Hydraulic valves, backhoe 4 function
  • Hydraulics, load sensing with variable displacement piston pump
  • Indicator lights: wait to start, water in fuel, engine warning, warning lamp, object handling stability warning, manual regeneration required, low engine oil pressure; LCD warnings: machine locked (if equipped), service due, air filter blocked, auto idle shutdown, high coolant temperature, high torque converter temperature, high exhaust temperature, engine oil life indicator
  • Instrument panel lights
  • Key start/stop system
  • LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info
  • Lights, working (2 front, 2 rear)
  • Loader, self-leveling, return-to-dig and transmission disconnect switch
  • Loader, single tilt
  • Mirror, rearview
  • Open circuit breather
  • Power receptacle, 12 volt, 2 internal, 1 external
  • Power steering, hydrostatic
  • Seat belt, retractable, 51 mm (2 in)
  • Stabilizer shoes, street
  • Steering knob
  • Seat, air suspension, fabric or vinyl cover, with armrest
  • Socket, two roof
  • Starting system, glow plugs
  • Steering, hydrostatic
  • Storage compartment, lockable
  • Storage tray
  • Stop and tail lights
  • Swing transport lock
  • Tires
  • Toolbox, external, lockable
  • Torque converter
  • Throttle, hand and foot, electronic
  • Transmission, four speed, syncromesh
  • Transmission neutralizer switch
  • Transport tie-downs
  • Two Wheel Drive
  • Vandalism locks, three
  • Warning horn, electric
  • Backhoe controls, pilot joysticks
  • Battery, additional, 880 CCA
  • Cab, standard
  • Cold weather fuel (–30° C/–22° F)
  • Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
  • Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
  • Fenders, front with integral steps
  • Four Wheel Drive/Brake Mode Selector
  • Guard, boom protection plate
  • Guard, stabilizer, rock
  • Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler)
  • Hydraulic valves, backhoe (5th and 6th function)
  • Hydraulic lines, combined function auxiliary
  • Product Link, satellite, PL631E
  • Product Link, cellular, PL641I
  • Quick Coupler, hydraulic, dual lock
  • Quick Coupler, manual, dual lock
  • Quick Coupler, pin lock
  • Radio and CD player
  • Radio and CD player, Bluetooth
  • Ride Control
  • Rotating beacon, magnetic mount
  • Seat belt, 75 mm (3 in)
  • Security system keypad
  • Stabilizer pads, grouser type
  • Stabilizer pads, reversible
  • Stick, extendible
  • Storage box
  • Vandalism protection, gauge cover
  • Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You