Cat Dozers:

Cat® D6N WH Waste Handler

Engine Model
Cat C7.1 ACERT™
Flywheel Power
182 hp
Operating Weight
40818 lb
Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349 (DIN)
168 hp

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.



Product Specs

  • Engine

  • Engine Model
    Cat C7.1 ACERT™
    Flywheel Power
    182hp
    Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349 (DIN)
    168hp
    Net Power (Maximum – 2,200 rpm): SAE J1995
    182hp
    Net Power (Maximum – 2,200 rpm): ISO 14396
    178hp
    Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349
    166hp
    Bore
    4.1in
    Stroke
    5.3in
    Displacement
    433in3
    Emissions
    Tier 4 Final/Stage IV/Korea Tier 4 Final
    Note
    All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are a
    Note
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
    Net Power (Maximum – 2,200 rpm): ISO 14396 (DIN)
    180hp
  • Weights

  • Operating Weight
    40818lb
    Operating Weight – XL Waste Handler
    40818lb
    Operating Weight – LGP Waste Handler
    44749lb
    Shipping Weight – XL Waste Handler
    40029lb
    Shipping Weight – LGP Waste Handler
    43642lb
  • Blades – Capacity (SAE J1265)

  • XL VPAT Landfill*
    8.29yd3
    XL VPAT
    4.3yd3
    XL SU
    5.6yd3
    LGP VPAT Landfill*
    7.39yd3
    LGP VPAT
    5.1yd3
    Note
    *Blade capacity with trash rack.
  • Dimensions – XL

  • Track Gauge
    74.4in
    Width of Tractor (without trunnions)
    98.4in
    Machine Height from Tip of Grouser to Exhaust Stack
    122.4in
    Length of Track on Ground
    101.6in
    Length of Basic Tractor (with drawbar)*
    157.3in
    Height of Grouser
    2.6in
    Ground Clearance
    14.3in
    Ground Pressure
    6.7psi
    Note
    *Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
  • Dimensions – LGP

  • Track Gauge
    85.0in
    Width of Tractor (without trunnions)
    118.0in
    Machine Height from Tip of Grouser to Exhaust Stack
    126.9in
    Length of Track on Ground
    122.7in
    Length of Basic Tractor (with drawbar)*
    166.2in
    Height of Grouser
    2.2in
    Ground Clearance
    18.8in
    Ground Pressure
    4.5psi
    Note
    *Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
  • Transmission

  • 0.5 Forward
    1.6mph
    0.7 Forward
    1.7mph
    1.0 Forward
    2.1mph
    1.5 Forward
    2.7mph
    1.7 Forward
    3.0mph
    2.0 Forward
    3.6mph
    2.5 Forward
    4.7mph
    2.7 Forward
    5.2mph
    3.0 Forward
    6.1mph
    0.5 Reverse
    1.9mph
    0.7 Reverse
    2.1mph
    1.0 Reverse
    2.5mph
    1.5 Reverse
    3.4mph
    1.7 Reverse
    3.7mph
    2.0 Reverse
    4.4mph
    2.5 Reverse
    5.9mph
    2.7 Reverse
    6.5mph
    3.0 Reverse
    7.6mph
  • Blades – Width (over end bits)

  • XL VPAT Landfill*
    10.23ft
    XL VPAT
    10.75ft
    XL SU
    10.33ft
    LGP VPAT Landfill*
    12.89ft
    LGP VPAT
    13.38ft
    Note
    *Blade capacity with trash rack.

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You