Cat Dozers:

Cat® D8T WH Waste Handler

Engine Model
Cat C15 ACERT™
Flywheel Power
335 hp
Operating Weight
86710 lb
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
317 hp

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.



Product Specs

  • Engine

  • Engine Model
    Cat C15 ACERT™
    Flywheel Power
    335hp
    Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
    317hp
    Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349
    335hp
    Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349 DIN
    343hp
    Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349
    312hp
    Bore
    5.4in
    Stroke
    6.75in
    Displacement
    928in3
    Emissions
    Tier 4 Final/Stage IV/Korea Tier 4
    Note
    All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
    Note
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Weights

  • Operating Weight
    86710lb
  • Operating Weight

  • Standard Waste Handler
    86710lb
    LGP Waste Handler
    91600lb
  • Shipping Weight

  • Standard Waste Handler
    73400lb
    LGP Waste Handler
    77900lb
  • Blades – Capacity (SAE J1265)

  • 8 SU Landfill
    25.6yd3
    8 U Landfill
    27.7yd3
    8 SU LGP Landfill
    28.9yd3
  • Blades – Width (over end bits)

  • 8 SU Landfill
    12.9ft
    8 U Landfill
    13.9ft
    8 SU LGP Landfill
    14.9ft
  • Dimensions – Standard

  • Height (to top of roof-mounted precleaner)
    145.2in
    Length Basic Tractor (with striker bars with two counterweights)*
    206.4in
    Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
    183.0in
    Height of Grouser
    3.1in
    Track Gauge
    82.0in
    Width of Tractor (over trunnions)
    120.4in
    Without Trunnions (standard shoe width)
    106.0in
    Machine Height (from grouser tip) – Exhaust Stack
    136.7in
    Machine Height (from grouser tip) – EROPS (to top of railing)
    140.4in
    Machine Height (from grouser tip) – Length of Track on Ground
    126.2in
    Machine Height (from grouser tip) – Ground Clearance
    24.1in
    Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
  • Dimensions – Non-Suspended

  • Height (to top of roof-mounted precleaner)
    145.2in
    Length Basic Tractor (with striker bars with two counterweights)*
    206.4in
    Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
    183.0in
    Height of Grouser
    3.1in
    Track Gauge
    82.0in
    Width of Tractor (over trunnions)
    120.4in
    Without Trunnions (standard shoe width)
    106.0in
    Machine Height (from grouser tip) – Exhaust Stack
    136.3in
    Machine Height (from grouser tip) – EROPS (to top of railing)
    140.7in
    Machine Height (from grouser tip) – Length of Track on Ground
    128.3in
    Machine Height (from grouser tip) – Ground Clearance
    23.8in
    Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
  • Dimensions – LGP

  • Height (to top of roof-mounted precleaner)
    145.2in
    Length Basic Tractor (with striker bars with two counterweights)*
    206.4in
    Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
    183.0in
    Height of Grouser
    3.1in
    Track Gauge
    92.0in
    Width of Tractor (over trunnions)
    130.4in
    Without Trunnions (standard shoe width)
    130.0in
    Machine Height (from grouser tip) – Exhaust Stack
    129.7in
    Machine Height (from grouser tip) – EROPS (to top of railing)
    140.4in
    Machine Height (from grouser tip) – Length of Track on Ground
    126.2in
    Machine Height (from grouser tip) – Ground Clearance
    24.1in
    Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
  • Transmission

  • 1 Forward
    2.1mph
    2 Forward
    3.8mph
    3 Forward
    6.6mph
    1 Reverse
    2.8mph
    2 Reverse
    5mph
    3 Reverse
    8.8mph

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You