Cat Dozers:

D11T/D11T CD Dozer

Engine Model
Cat® C32 ACERT™
Flywheel Power
850 hp
Operating Weight
229800 lb
Shipping Weight
82640 lb

Cat® large dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. By optimizing performance and simplifying serviceability with our modular design, our machines move more material efficiently and safely at a lower cost per ton. These models include safety enhancements, improved operator comfort, and productivity increasing electronic features to keep your business strong for generations to come.



Benefits & Features

Product Specs

  • Engine

  • Engine Model
    Cat® C32 ACERT™
    Flywheel Power
    850hp
    Net SAE J1349/ISO 9249
    850hp
    Bore
    5.7in
    Stroke
    6.4in
    Displacement
    1959in3
    Engine Power – ISO 14396
    908hp
    Engine Power – Gross SAE J1995*
    913hp
    Emissions
    U.S. EPA Tier 4 Final
    Engine Power – Net SAE J1349/ISO 9249
    850hp
    Note
    * Excludes all fan losses.
    Note
    Engine ratings apply at 1,800 rpm.
    Note
    Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
    Note
    No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
  • Weights

  • Operating Weight
    229800lb
    Shipping Weight
    82640lb
    Operating Weight – CD
    248500lb
    Shipping Weight – CD
    83340lb
    Note
    D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
    Note
    D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn’t include ROPS, ripper, blade, track, or roller frames.
    Note
    D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
    Note
    D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn’t include ROPS, ripper, blade, track, or roller frames.
  • Undercarriage

  • Shoe Type
    Extreme Service
    Width of Shoe
    28.0in
    Width of Shoe – CD
    36.0in
    Shoes/Side
    41
    Grouser Height
    4.0in
    Pitch
    12.5in
    Ground Clearance*
    30.6in
    Track Gauge
    114.0in
    Ground Contact Area
    9781in2
    Ground Contact Area – CD
    12605in2
    Track Rollers/Side
    8
    Number of Carrier Rollers
    1 per side (optional)
    Length of Track on Ground
    175.0in
    Note
    * Includes grouser height for total dimensions on hard surface.
    Note
    Sleeve Bearing Track with Positive Pin Retention.
  • Transmission

  • 1 Forward
    2.4mph
    2 Forward
    4.2mph
    3 Forward
    7.3mph
    1 Reverse
    2.9mph
    2 Reverse
    5.1mph
    3 Reverse
    8.7mph
    Type
    Planetary powershift
    Transmission Clutch Diameter
    21.0in
  • Service Refill Capacities

  • Fuel Tank
    425gal
    Fuel Tank – High Capacity
    505gal
    Cooling System
    71.1gal
    Engine Crankcase*
    27.2gal
    Final Drives (each)
    12.4gal
    Roller Frames (each)
    24.8gal
    Pivot Shaft Compartment
    18.8gal
    Implement Hydraulic System Tank Only
    58.9gal
    Power Train
    90.9gal
    Fuel Tank – Platform Ready
    470gal
    Note
    * With oil filters.
  • Standards

  • ROPS
    Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
    FOPS
    Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
    Sound
    The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
    Sound
    The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
  • Hydraulic Controls

  • D11T CD – Carrydozer Relief Valve Setting
    3500.0psi
    D11T CD – Pump Output (Implement)
    177.0gal/min
    D11T CD – Pump Type
    Gear-type pump
    D11T CD – Ripper (Lift) Relief Valve Setting
    3500.0psi
    D11T CD – Ripper (Pitch) Relief Valve Setting
    3500.0psi
    D11T CD – Tilt Cylinder Flow
    66.0gal/min
    D11T CD – Tilt Cylinder Relief Valve Setting
    3600.0psi
    D11T – Bulldozer Relief Valve Setting
    3300.0psi
    D11T – Combined Pump Output (Implement)
    164.0gal/min
    D11T – Pump Type
    Gear-type pump
    D11T – Ripper (Lift) Relief Valve Setting
    3300.0psi
    D11T – Ripper (Pitch) Relief Valve Setting
    3300.0psi
    D11T – Tilt Cylinder Relief Valve Setting
    3525.0psi
    D11T – Tilt Pump Flow
    41.0gal/min
    Note
    Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
    Note
    Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
    Note
    Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
  • Steering and Brakes

  • Hydraulically applied multiple-disc Steering Clutch
    17.3in
    Spring applied multiple-disc Brake
    24.1in
  • Track Roller Frame

  • Oscillation
    13.8in
  • Dimensions (Approximate) – D11T

  • Ground Clearance*
    31.4in
    Track Gauge
    114.0in
    Width without Trunnions (Standard Shoe)
    148.9in
    Width over Trunnions
    172.4in
    Height (FOPS Cab)*
    173.4in
    Height (Top of Stack)*
    179.1in
    Height (ROPS/Canopy)*
    185.9in
    Drawbar Height (Center of Clevis)*
    37.1in
    Length of Track on Ground
    175.0in
    Overall Length Basic Tractor
    242.5in
    Length Basic Tractor with Drawbar
    242.5in
    Length with SU-Blade
    337.8in
    Length with U-Blade
    340.2in
    Length with Single-Shank Ripper
    319.2in
    Length with Multi-Shank Ripper
    331.8in
    Overall Length SU-Blade and SS Ripper
    414.4in
    Note
    *Includes grouser height for total dimensions on hard surfaces.
    Note
    D11T shown equipped with 710 mm (28 in) shoes.
  • Dimensions (Approximate) – D11T CD

  • Ground Clearance*
    31.4in
    Track Gauge
    114.0in
    Width without Trunnions (Standard Shoe)
    149.8in
    Width over Trunnions
    172.4in
    Height (FOPS Cab)*
    173.4in
    Height (Top of Stack)*
    179.1in
    Height (ROPS/Canopy)*
    185.9in
    Drawbar Height (Center of Clevis)*
    37.1in
    Length of Track on Ground
    175.0in
    Overall Length Basic Tractor
    242.5in
    Length Basic Tractor with Drawbar
    242.5in
    Length with SU-Blade**
    345.1in
    Length with Single-Shank Ripper
    319.2in
    Length with Multi-Shank Ripper
    331.8in
    Overall Length SU-Blade and SS Ripper**
    421.7in
    Note
    *Includes grouser height for total dimensions on hard surfaces.
    Note
    **CD Blade on D11T CD.
    Note
    D11T shown equipped with 710 mm (28 in) shoes.

Equipment

  • Electrical
    • Alternator, 150 amp
    • Back up alarm
    • Batteries, 12-volt (4), 200 amp-hour
    • Converters, 12-volt, 10 amp and 20 amp
    • Diagnostic connector
    • Horn, forward warning
    • Lights, engine compartment
    • Lighting system, five (5) HID/seven (7) Halogen
    • Starting receptacle
  • Operator Environment
    • Advisor-electronic monitoring system
    • Air conditioner and heater
    • Armrest, adjustable
    • Cab, FOPS
    • Deactivation switch, hydraulic controls
    • Decelerator, pedal
    • Finger Tip Control (FTC) steering
    • Governor switch, electronic
    • Hydraulic system: – Electronically controlled for bulldozer and ripper control
    • Mirror, rearview
    • Radio ready, entertainment
    • ROPS rollbar
    • Seat belt, retractable 76 mm (3 in)
    • Seat, cloth, air suspension
    • Wipers, intermittent, low and high speeds
  • Power Train
    • C32 with ACERT Technology
    • Aftercoolers, air-to-air
    • Air filters, dual with precleaner
    • Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG
    • Controlled throttle shifting
    • Coolant, extended life
    • Shift management
    • Engine Idle Shutdown Timer
    • Engine precleaner
    • Ether starting aid, automatic
    • Four planet, double-reduction planetary final drives
    • Fuel priming pump, electric
    • High speed oil changing system
    • Hydraulic demand fan
    • Mesabi radiator: – Serial number prefix: JEL and JNS
    • Mufflers, dual
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Thermal shields
    • Torque divider
    • Transmission, powershift: – (3F/3R speeds)
  • Technology
    • Auto blade assist
    • Enhanced auto shift
    • Product Link (satellite)
    • VIMS 3G
  • Undercarriage
    • Equalizer bar end pin grease fittings, remote
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Three bolt idler and roller caps
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • Safety And Security
    • Anchorage points
    • Fender guard rails
    • Heavy duty steps and handles
    • Operator not present monitoring system
    • Slope and side-slope monitor
  • Other Standard Equipment
    • Bottom guards
    • CD ROM parts book
    • Dual-tilt blade control
    • Ecology drains
    • Engine enclosure
    • Fluid sampling ports
    • Grade control ready
    • Ground level service center
    • Ripper Hydraulics
    • Vandalism, protection (8 caplocks)
  • Guards
    • Bottom guards, sealed
    • Bottom guards, partial
    • Guard, undercarriage idlers
    • Screens, grill door
  • Operator Station
    • Air conditioner: – Fender – ROPS
    • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
    • Heated and ventilated seat
    • Operator arrangement: – 5th percentile arrangement – Quick opening
    • Powered precleaner
    • Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors
    • Window shades
  • Power Train
    • Engine coolant, arctic
    • Engine precleaner, turbine
    • Engine prelube
    • Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)
    • Final drives: – Clamshell guard
    • High altitude arrangement (Not available on D11T Carrydozer.)
    • Mesabi radiator: – Serial number prefix: AMA and MDG
    • Remote power train and engine high speed oil change system located at the ground level service center
  • Undercarriage
    • Carrier rollers
    • Carrier rollers – cold weather
    • Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service trapezoidal hole (Not available on D11T Carrydozer.) – 810 mm (32 in) Extreme Service – 810 mm (32 in) Extreme Service abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole – 810 mm (32 in) Extreme Service tall links – 810 mm (32 in) Extreme Service tall links abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole tall links – 915 mm (36 in) Extreme Service clipped – 915 mm (36 in) Extreme Service clipped abrasion resistant material – 915 mm (36 in) Extreme Service clipped trapezoidal hole – 915 mm (36 in) Extreme Service clipped tall links
    • Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound
  • Bulldozer Attachments
    • 11CD Abrasion resistant blade
    • 11CD No wear plate
    • 11SU Abrasion resistant blade (Not available on D11T Carrydozer.)
    • 11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)
    • 11SU No wear plate (Not available on D11T Carrydozer.)
    • 11U Abrasion resistant blade (Not available on D11T Carrydozer.)
    • 11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)
    • 11U No wear plate (Not available on D11T Carrydozer.)
  • Rear Attachments
    • Counterweight, rear
    • CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep
    • Drawbar, rear (Not available on D11T Carrydozer.)
    • Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
    • Ripper lube
    • Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
  • Technology
    • Command for Dozing (Installed by dealer.)
    • Machine control, performance: – AutoCarry – Automatic ripper control
    • Terrain for Grading: – With blade control
  • Safety And Security
    • Access arrangement (ladder and platform)
    • Fuel tank: – Platform ready – Extra capacity
    • Lights: – LED – LED, high intensity – Warning, strobe
    • Powered access ladder
    • Rear access platform
  • Other Attachments
    • Automatic lubrication system
    • Grease points, grouped
    • Heater, engine coolant
    • Heater, fuel
    • Hydraulic lines, AutoCarry
    • Hydraulic lines, screens
    • Hydraulic lines, screens and AutoCarry

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You