Cat Wheel Loaders:

910M Compact Wheel Loader

Maximum Gross Power: Maximum Engine Speed
2350 RPM
Operating Weight
17893 lb
Rated Bucket Capacity
2.5 yd3
Net Power
97 hp


Benefits & Features

Product Specs

  • Engine

  • Maximum Gross Power: Maximum Engine Speed
    2350RPM
    Net Power
    97hp
    Engine Model
    Cat C4.4 ACERT™
    Maximum Gross Power: SAE J1995
    102hp
    Maximum Gross Power: ISO 14396
    100hp
    Maximum Gross Power: ISO 14396 (DIN)
    101hp
    Rated Net Power: Rated Engine Speed
    2200RPM
    Rated Net Power: SAE J1349
    96hp
    Rated Net Power: ISO 9249
    97hp
    Rated Net Power: ISO 9249 (DIN)
    98hp
    Maximum Gross Torque: SAE J1995
    336lbf-ft
    Maximum Gross Torque: ISO 14396
    332lbf-ft
    Maximum Net Torque: SAE J1349
    325lbf-ft
    Maximum Net Torque: ISO 9249
    329lbf-ft
    Displacement
    268in3
    Bore
    4.13in
    Stroke
    5.00in
    Emissions
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Note
    Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Gross Power
    100hp
  • Weights

  • Operating Weight
    17893lb
  • Operating Specifications

  • Rated Bucket Capacity
    2.5yd3
  • Service Refill Capacities

  • Cooling System
    5.7gal
    Fuel Tank
    40.7gal
    Hydraulic System (including tank)
    25.9gal
    Engine Crankcase
    2.3gal
    Axles: Front Center Differential
    2.0gal
    Axles: Rear Center Differential
    2.0gal
    Hydraulic Tank
    14.5gal
    Diesel Exhaust Fluid (DEF) Tank
    5.0gal
    Note
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Transmission
    0.9gal
  • Buckets

  • Bucket Capacities
    1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
  • Steering

  • Steering Articulation Angle (each direction)
    40degrees
    Maximum Flow – Steering Pump
    17gal/min
    Maximum Working Pressure – Steering Pump
    2683psi
    Steering Cycle Times (full left to full right): At 2,350 RPM: 90 RPM steering wheel speed
    3.2seconds
    Number of Steering Wheel Turns – full left to full right or full right to full left
    3.75turns
  • Loader Hydraulic System

  • Maximum Flow – Implement Pump
    32gal/min
    Maximum Flow – Implement Pump: 3rd Function, Maximum Flow
    24gal/min
    Maximum Flow – Implement Pump: 4th Function, Maximum Flow
    24gal/min
    Maximum Working Pressure – Implement Pump
    3408psi
    Relief Pressure – Tilt Cylinder
    4931psi
    Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
    3046psi
    Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure
    3046psi
    Hydraulic Cycle Times: Raise (ground level to maximum lift)
    5.2seconds
    Hydraulic Cycle Times: Dump (at maximum reach)
    1.4seconds
    Hydraulic Cycle Times: Rack Back
    2.2seconds
    Hydraulic Cycle Times: Float Down (maximum lift to ground level)
    3.7seconds
    Hydraulic Cycle Times: Total Cycle Time
    12.5seconds
  • Transmission

  • Forward and Reverse: Low Range, Speed Range 1*
    6.3mph
    Forward and Reverse: Low Range, Speed Range 2*
    12.5mph
    Forward and Reverse: High Range
    25mph
    Note
    *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
  • Tires

  • Standard Size
    15.5-25 12PR
    Other Choices Include:
    15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport™
    Note
    Other tire choices are available. Contact your Cat dealer for details.
    Note
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Note
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Cab

  • ROPS
    ISO 3471:2008
    FOPS
    ISO 3449:2005 Level II
    Note
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
    Note
    The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
    Note
    *The measurements were conducted with the cab doors and windows closed.
  • Axles

  • Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ±11 degrees; Locking differential (Standard)

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You