Cat Wheel Loaders:

930M Wheel Loader

Operating Weight
30879 lb
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Maximum Rated Gross Power: ISO 14396
164 hp
Rated Net Power
157 hp

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.



Benefits & Features

Product Specs

  • Weights

  • Operating Weight
    30879lb
  • Buckets

  • Bucket Capacities
    2.1-5.0 m3 (2.7-6.5 yd3)
    Bucket Capacities – General Purpose
    2.1-2.7 m3 (2.7-3.5 yd3)
    Bucket Capacities – Light Material
    3.1-5.0 m3 (4.0-6.5 yd3)
  • Engine

  • Maximum Rated Gross Power: ISO 14396
    164hp
    Rated Net Power
    157hp
    Maximum Rated Gross Power: ISO 14396 (DIN)
    166hp
    Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4)
    1800rpm
    Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4)
    164hp
    Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
    166hp
    Rated Net Power at 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    157hp
    Engine Model
    Cat® C7.1 ACERT™
    Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    160hp
    Note
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Note
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Note
    Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    162hp
    Maximum Gross Power
    164hp
    Emissions
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)
    592lbf-ft
    Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)
    566lbf-ft
    Stroke
    5in
    Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    572lbf-ft
    Note
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600rpm
    Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)
    160hp
    Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    162hp
    Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    154hp
    Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    156hp
    Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    158hp
    Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)
    592lbf-ft
    Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)
    566lbf-ft
    Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    572lbf-ft
    Displacement
    427in3
    Bore
    4in
  • Service Refill Capacities

  • Front Axles
    6.9gal
    Rear Axles
    6.6gal
    Hydraulic System (Including Tank)
    43.6gal
    Hydraulic Tank
    23.8gal
    Diesel Exhaust Fluid (DEF) Tank
    5.0gal
    Fuel Tank
    51.5gal
    Cooling System
    7.9gal
    Engine Crankcase
    5.3gal
    Transmission (Gear Box)
    2.2gal
  • Transmission

  • Forward and Reverse: Range 1*
    1-13 km/h (0.6-8 mph)
    Forward and Reverse: Range 2
    8mph
    Forward and Reverse: Range 3
    17mph
    Forward and Reverse: Range 4
    25mph
    Note
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    Note (cont'd)
    Factory default is 7 km/h (4.4 mph).
  • Tires

  • Standard Size
    20.5 R25, radial (L-3)
    Other Choices Include:
    20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
    Other Choices Also Include:
    20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Flexports Gen II
  • Cab

  • ROPS
    ISO 3471: 2008
    FOPS
    ISO 3449: 2005 LEVEL II
    Note
    Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab
    Note
    * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
  • Axles

  • Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
  • Loader Hydraulic System

  • Note
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)
    2.7/2.7 seconds
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time
    9.3/10.1 seconds
    Note
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    Maximum Flow – Implement Pump
    50gal/min
    Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
    50gal/min
    Maximum Flow – Implement Pump: 4th Function Maximum Flow*
    42gal/min
    Maximum Working Pressure – Implement Pump
    3626psi
    Relief Pressure – Tilt Cylinder
    4061psi
    Relief Pressure – Tilt Cylinder: 3rd and 4th Function Maximum Working Pressure
    3626psi
    Relief Pressure – Tilt Cylinder: 3rd and 4th Function Relief Pressure
    4061psi
    Lift Cylinder: Double Acting – Bore Diameter
    4.7in
    Lift Cylinder: Double Acting – Rod Diameter
    2.6in
    Lift Cylinder: Double Acting – Stroke
    28.7in
    Tilt Cylinder: Double Acting – Bore Diameter
    5.9in
    Tilt Cylinder: Double Acting – Rod Diameter
    3.5in
    Tilt Cylinder: Double Acting – Stroke
    21.9in
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)
    5.1/5.7 seconds
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)
    1.5/1.7 seconds
  • Steering

  • Note
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
    2.8seconds
    Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed
    2.4seconds
    Steering Cylinder: Double Acting – Bore Diameter
    2.8in
    Steering Cylinder: Double Acting – Rod Diameter
    1.6in
    Steering Cylinder: Double Acting – Stroke
    17.2in
    Maximum Flow – Steering Pump
    34gal/min
    Maximum Working Pressure – Steering Pump
    3500psi
    Maximum Steering Torque – 0° (Straight Machine)
    37155lbf-ft
    Maximum Steering Torque – 40° (Full Turn)
    27747lbf-ft
  • Power Train

  • Note
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Note
    Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Front Axle
    Fixed
    Front Axle: Traction Aid (standard)
    Locking differential
    Rear Axle
    Oscillating
    Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
    Rear Axle: Oscillation Angle by Tire Size – Solid Tires, 750/65, 620/65, Skidder
    ± 7 degrees
    Rear Axle: Traction Aid (optional)
    Limited slip differential
    Brakes: Service
    Inboard wet disc
    Brakes: Park
    Spring applied hydraulically released
  • Operating Specifications

  • Full Turn Tip Load
    18670lb

Equipment

  • Power Train
    • Axle seal guards
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and aftercooled – Diesel particulate filter (Fit for Life)
    • Coolant protection to –34° C (–29° F)
    • Differential lock in front axle
    • Dry type air cleaner
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Fuel water separator
    • Hydraulically driven demand cooling fan
    • Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed
    • Lubed for life driveshafts
    • Parking brake, electric
    • Wide spaced 6 fins per inch cooling package
    • S·O·SSM sampling ports
    • Throttle lock and maximum speed limiter
  • Hydraulics
    • Automatic lift, lower and tilt kickouts
    • Bucket and Fork Modes, adjustable in-cab
    • Cylinder damping at kickout and end stops
    • Fine Mode control in Fork Mode
    • Hydraulic Response setting
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • Electrical
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24 volt system
    • Back-up alarm
    • Emergency shutdown switch
    • Heavy duty gear reduction starter
    • Product Link PRO with subscription
    • Remote jump start post
    • Resettable critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, enclosed and pressurized
    • Cup holders
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Gauges: – Digital hour, odometer, tachometer, ground speed and direction indicator – Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Operator warning system indicators
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted controls, adjustable
    • Sliding glass on the side windows
    • Column mounted multi function control – lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt and telescopic steering wheel
    • Wet arm wiper/washer, front and rear
  • Other Standard Equipment
    • Large-access enclosure doors
    • Parallel lift loader linkage
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures
  • Antifreeze/coolant, extended-life
  • Auto lube, integrated in secondary display
  • Auxiliary flow, third and fourth function
  • Axles, differential, limited slip, rear
  • Beacon light, strobe
  • Cab, Deluxe (standard In Europe):
    • Automatic blower control
    • Electrically adjustable heated mirrors (2)
    • LED interior lighting
    • Secondary display to adjust settings
  • Ride control adjustable speed activation
  • Preventative maintenance reminders
  • Integrated help function (26 languages)
  • Sunscreen, front and rear
  • Camera, rearview (standard in Europe)
  • Cold Start Package:
    • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
  • Counterweight, (heavy and logger)
  • Coupler, (Fusion and ISO 23727)
  • Debris packages (low, medium, high)
  • Fenders (extended cover and full coverage)
  • Guards
    • Power train, (lower, side, driveshaft and crankcase)
    • Windshield and lights
    • Cylinders, tilt and steering
    • Rear radiator, heavy duty
  • Linkage, high lift
  • Lights, auxiliary, halogen or LED with engine compartment lights
  • Rear Object Detection
  • Radio Packages:
    • Radio ready with Bluetooth
    • Radio, AM/FM with Bluetooth and clock
    • Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
  • Seats:
    • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
    • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
  • Steering:
    • Dual mode and Secondary
  • Tires:
    • Bias ply, 17.5, 20.5-25, Skidder
    • Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
    • Solid tires, 620/65, 750/65 Agriculture
  • Work tools

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You