Industrial:

Cat® C1.5 Industrial Power Unit

Minimum Power
33.7 bhp
Maximum Power
36.0 bhp
Emissions
U.S. EPA Tier 4 Final or EU Stage IIIA
Rated Speed
2800-3000 rpm

The Cat® C1.5 Industrial Power Unit is offered in the following rating: 27 bkW (36 bhp) @ 2800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Rating: 24.2 bkW (32.5 bhp) @ 3000 meets EU Stage IIIA (U.S. EPA Tier 4 Interim) emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.



Product Specs

  • Power Rating

  • Minimum Power
    33.7bhp
    Maximum Power
    36.0bhp
    Rated Speed
    2800-3000 rpm
  • Emission Standards

  • Emissions
    U.S. EPA Tier 4 Final or EU Stage IIIA
  • General

  • Engine Configuration
    Inline 3, 4-Stroke-Cycle Diesel
    Bore
    84 mm (3.3 in)
    Stroke
    90 mm (3.5 in)
    Displacement
    1.496 L (91 in³)
    Aspiration
    Naturally Aspirated (NA)
    Compression Ratio
    22.5:1
    Rotation (from flywheel end)
    Counterclockwise
    Cooling System Capacity
    5.98 L (6.3 qt)
    Lube System (refill)
    6 L (6.3 qt)
  • Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    820 mm (32.3 in)
    Width
    497 mm (19.6 in)
    Height
    793 mm (31.2 in)
    Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
    175 kg (385.8 lb)
  • Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • Weight
    13 kg (28.7 lb)

Equipment

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
    • Tier 4 Final: Alternator 12V 85 amp
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted air cleaner
    • Mounted radiator and fan
  • Flywheel & Flywheel Housing
    • Naturally Aspirated: SAE No. 7 1/2 flywheel
    • Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for timing case rear facing PTO
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request
  • Tier 4 Final Aftertreatment / Clean Emissions Control Equipment
    • Diesel Particulate Filter (DPF)
    • Diesel Oxidation Catalyst (DOC)
    • Passive regeneration system with backup

Request a Quote

Please leave this field empty.

Find a Walker CAT
Location or Rep Near You